What to do if my Mercado Medic REAL 6100 PLUS's control unit doesn't work and the LEDs are flashing?
The control unit button lock may be activated. This happens if the main switch is pressed and held for 4 seconds while the device is running. Refer to section 5.3 of the manual, 'Control unit,' for instructions on how to activate and disable button locks.
Why does my Mercado Medic Wheelchair have 2 flashes?
Two flashes indicate several potential issues: * A defective or disconnected cable: Check all cables. * A disconnected Bluetooth connection: Check Bluetooth connectivity and the charger, then charge the batteries. * Corrupt software: Reprogram the system. * Wrong software version: Update the software, especially after changing any module. * Defective module: Replace the component if the error continues after checking the above.
General| Type | Manual Wheelchair |
|---|---|
| Frame Material | Steel |
| Foldable | Yes |
| Seat Depth | 40 cm |
| Backrest Height | 40 cm |
| Overall Width | 64 cm |
| Wheel Size | 24 inches |
To Next Page