49Seats
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
Memory function
6 Memory button
7 Position buttons
Storing positions into memory
Three sets of seat/head restraint/steering wheel and
exterior rear view mirror positions may be programmed
into memory. After the seat/head restraint/steering
wheel and exterior rear view mirrors are positioned,
push memory button (6), release, and within 3 seconds
push position button “1”. A second and third set of
positions for the same seat/head restraint/steering
wheel and exterior rear view mirrors can be
programmed into memory by pushing first memory
button (6) and then “2”, respectively “3”.
Note:
For instructions on adjustment of steering wheel and
mirrors, see page 81 and 82.
7
6
P54.00-2075-26
To Next Page
Loading...
