142
Controls in detail
Control system
Standard display menu
In the standard display, the outside tem-
perature and the trip odometer are shown
in the multifunction display.
1 Outside temperature
2 Trip odometer
If you see another display, press
button è or ÿ repeatedly until the
standard display appears.
You can select the functions in the stan-
dard display menu with button k
or j.
The following functions are available:
Display digital speedometer
왘 Press button j or k repeatedly
until the digital speedometer appears
in the multifunction display.
The current vehicle speed is shown in
the multifunction display and the sta-
tus line appears.
1 Digital Speedometer
2 Status line with outside temperature
3 Trip odometer
i
The headings used in the menus table
are designed to facilitate navigation
within the system and are not neces-
sarily identical to those shown in the
control system displays.
The first function displayed in each
menu will automatically show you
which part of the system you are in.
i
You can have the digital speedometer
displayed instead of the outside tem-
perature in the standard display. You
can select the setting in the submenu
Instr. cluster
via the function
Basic
display
(컄 page 151).
Function Page
Call up digital speedometer 142
Call up maintenance service
display
345
Check engine oil level 310
i
You can have the digital speedometer
displayed instead of the outside tem-
perature in the status line. You can se-
lect the setting in the submenu
Instr.
cluster
via the function
Status line
display
(컄 page 150).
To Next Page
Loading...
Need help?
General
