105
Controls in detail
Memory function*
Storing exterior rear view mirror
parking position (parking aid)
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
You can switch the parking position fea-
ture on and off via the control system
(
컄 page 144).
For information on activating the parking
position feature, see “Activating exterior
rear view mirror parking position (parking
aid)” (
컄 page 169).
The switches are located on the lower part
of the center console.
1 Driver’s side exterior rear view mirror
switch
2 Adjustment switch
3 Passenger-side exterior rear view mir-
ror switch
왘 Switch on the ignition (컄 page 35).
왘 Press switch 3 to select the passen-
ger-side exterior rear view mirror.
왘 Adjust the passenger-side exterior rear
view mirror with adjustment switch 2
so that you see the rear wheel and the
road curb.
왘 Press memory button M (컄 page 104).
왘 Within three seconds, press adjust-
ment switch 2 forward, backward,
left, or right.
The parking position is stored if the
mirror does not move.
i
You can store one parking position for
the passenger-side exterior rear view
mirror for each SmartKey.
i
If the mirror does move, repeat the
above steps. After the setting is stored,
you can move the mirror again.
To Next Page
Loading...
Need help?
General
