472
Practical hints
Replacing bulbs
왘 Turn bulb socket 5 clockwise until it
engages.
왘 Insert corner-illuminating front fog
lamp 1 back into bumper.
왘 Fasten retaining screws 4.
왘 Reinsert cover 2 and press it in until it
engages.
왘 Fasten retaining screw 3.
Additional turn signal lamps bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Light
Truck Center.
Front sidemarker lamp bulbs
Since replacing the sidemarker lamp bulbs
is a technically highly demanding process,
we recommend you have the sidemarker
lamp bulbs replaced by an authorized
Mercedes-Benz Light Truck Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘 Turn the combination switch to
position M (
컄 page 147).
Tail lamp unit
왘 Open the tailgate (컄 page 122).
i
To access the tail lamp units, you have
to remove the cover in the correspond-
ing side trim panel of the cargo com-
partment.
컄컄
To Next Page
Loading...
Need help?
General
