172
Controls in detail
Automatic transmission*
Deactivating manual shift program
왘 Press the program mode selector
switch (
컄 page 169) repeatedly
until
C
or
S
appears in the multifunction
display.
or
왘 Restart the engine.
The transmission will go to the
automatic program mode (C or S).
The manual program mode M is not
stored.
Emergency operation
(Limp Home Mode)
If vehicle acceleration worsens or the
transmission no longer shifts, the trans-
mission is most likely operating in limp
home (emergency operation) mode. In this
mode only second gear and reverse gear
can be activated.
왘 Stop the vehicle.
왘 Move gear selector lever to P.
왘 Turn off the engine.
왘 Wait at least 10 seconds before
restarting.
왘 Restart the engine.
왘 Move gear selector lever to position D
(for second gear) or R.
왘 Have the transmission checked at an
authorized Mercedes-Benz Center as
soon as possible.
To Next Page
Loading...
Need help?
General
