253
Controls in detail
Useful features
Switching off
왘 Turn switch at the tip of stalk in direc-
tion of arrow 2.
The heated steering wheel is switched
off. Indicator lamp 3 goes out.
For information on steering wheel, see
“Multifunction steering wheel”
(
컄 page 142).
Floormats
1 Retainer pins
2 Eyelets
Removing
왘 Pull floormats off of retainer pins 1.
왘 Remove the floormats.
Installing
왘 Lay down the floormat.
왘 Press the floormat eyelets 2 onto re-
tainer pins 1.
i
Indicator lamp 3 flashes or goes out
앫 in case of power surge or undervoltage
앫 in case of a steering wheel heating malfunc-
tion
i
The steering wheel heating switches off au-
tomatically when you remove the SmartKey from
the starter switch or, on vehicles with
KEYLESS-GO*, when you switch off the ignition
(
컄 page 61) and open the driver’s door.
Warning! G
Whenever you are using floormats, make
sure there is enough clearance and that the
floormats are securely fastened.
Floormats should always be securely fas-
tened using eyelets 2 and retainer pins 1.
Before driving off, check that the floormats
are securely in place and adjust them if nec-
essary. A loose floormat could slip and
hinder proper functioning of the pedals.
Do not place several floormats on top of
each other as this may impair pedal
movement.
i
To install or remove the floormat more easi-
ly, move the driver’s seat or front passenger seat
as far to the rear as possible (
컄 page 42).
To Next Page
Loading...
Need help?
General
