Activating/deactivating the Speed Limit
Assist message function
X
Press the = or ; button on the steer-
ing wheel to select the Assist. menu.
X
Press the 9 or : button to select
Speed Lim. Asst.
X
Press the a button.
The multifunction display shows Speed
Limit Assist.
X
Press the : button.
The current selection is displayed.
X
To activate or deactivate: press a.
If the Speed Limit Assist message function
is activated, a detected speed limit is auto-
matically displayed for five seconds. Other
items in the multifunction display are not
shown during this time.
Showing the assistance graphic
X
Press the = or ; button on the steer-
ing wheel to select the Assist. menu.
X
Press the 9 or : button to select
Asst. graphic.
X
Press the a button.
The DISTRONIC PLUS assistance graphic
appears in the multifunction display
(Y page 198).
Deactivating/activating ESP
®
i
Observe the "Important safety notes" sec-
tion in the description of ESP (Y page 69).
G
WARNING
If you deactivate ESP
®
, ESP
®
no longer sta-
bilises the vehicle. There is an increased risk
of skidding and an accident.
Only deactivate ESP
®
in the situations descri-
bed in the following.
It may be best to deactivate ESP
®
in the fol-
lowing situations:
R
when using snow chains
R
in deep snow
R
on sand or gravel
Activating/deactivating ESP
®
on AMG vehi-
cles (Y page 70).
For further information about ESP
®
, see
(Y page 69).
X
Start the engine.
X
Press the = or ; button on the steer-
ing wheel to select the Assist. menu.
X
Press the 9 or : button to select
ESP.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
ESP
®
is deactivated if the
å
warning lamp
in the instrument cluster lights up continu-
ously when the engine is running.
If the ÷ warning lamp and the å warn-
ing lamp are lit continuously, ESP
®
is not
available due to a malfunction.
Observe the information on warning lamps
(Y page 297).
Observe the information on display messages
(Y page 266).
Activating/deactivating PRE-SAFE
®
Brake
PRE-SAFE
®
Brake is only available in vehicles
with DISTRONIC PLUS.
X
Press the = or ; button on the steer-
ing wheel to select the Assist. menu.
X
Press the 9 or : button to select
PRE-SAFE Brake.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
Menus and submenus
253
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
