X
Press a again.
X
Press the : or 9 button to select
one of the three departure times or TimerTimer
offoff (no timer active).
X
Press a to confirm.
If a departure time is selected, the yellow
indicator lamp lights up on the auxiliary
heating button.
Changing the departure time
X
Press the = or ; button on the steer-
ing wheel to select the SettingsSettings menu.
X
Press the : or 9 button to select the
HeatingHeating submenu.
X
Press a to confirm.
The current setting appears.
X
Press the : or 9 button to select
Change AChange A, Change BChange B or Change CChange C.
X
Press a to confirm.
You can now change the departure time.
X
Press the = or ; button to select the
display to be changed: hours, minutes.
X
Press the : or 9 button to set the
selected display.
X
Press the a button to store the entry.
The yellow indicator lamp on the auxiliary
heating button lights up.
Comfort
Switching belt adjustment on/off
X
Press the = or ; button on the steer-
ing wheel to select the SettingsSettings menu.
X
Press the : or 9 button to select the
ConvenienceConvenience submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Belt adjustmentBelt adjustment function.
When the Belt adjustmentBelt adjustment function is
activated, the seat belt is displayed in
orange in the multifunction display.
X
Press the a button to save the setting.
For further information on belt adjustment,
see (Y page 45).
Switching the fold mirrors in when lock-
ing function on/off
This function is only available when the vehi-
cle is equipped with the electrical fold-in func-
tion.
When you activate the Auto.Auto. fold-infold-in mir‐mir‐
rorsrors function, the exterior mirrors are folded
in when the vehicle is locked. When you
unlock the vehicle and then open the driver's
or front-passenger door, the exterior mirrors
fold out again.
If you have switched on the Auto.Auto. fold-infold-in
mirrorsmirrors function and you fold in the exterior
mirrors using the button on the door
(Y page 114), they will not fold out automat-
ically. The exterior mirrors can then only be
folded out using the button on the door.
X
Press the = or ; button on the steer-
ing wheel to select the SettingsSettings menu.
X
Press the : or 9 button to select the
ConvenienceConvenience submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Auto. fold-in mirrorsAuto. fold-in mirrors function.
If the Auto.Auto. fold-infold-in mirrorsmirrors function is
switched on, the multifunction display
shows the exterior mirror in orange.
X
Press the a button to save the setting.
Resetting to factory settings
X
Press the = or ; button on the steer-
ing wheel to select the SettingsSettings menu.
X
Press the : or 9 button to select the
Factory settingFactory setting submenu.
X
Press a to confirm.
The Reset all settings?Reset all settings? function
appears.
X
Press the : or 9 button to select NoNo
or YesYes.
X
Press the a button to confirm the selec-
tion.
If you have selected YesYes, the multifunction
display shows a confirmation message.
Menus and submenus
253
On-board computer/Displays
Z