Using reverse gear
:
Button for the driver's side exterior mirror
;
Button for the front-passenger side exterior
mirror
=
Button for the exterior mirror setting
?
Memory button M
X
Park the vehicle and turn the SmartKey to
position 2 in the ignition lock (
Y page 123).
X
Press button ; for the exterior mirror on the
front-passenger side.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use button = to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M ?. The reverse gear must not
be engaged.
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 123).
X
When the exterior mirror on the front-
passenger side is active, press button = to
adjust the exterior mirror. In the exterior mir-
ror, the rear wheel and the curb should be
visible.
X
Press memory button M ? and one of the
arrows on button = within three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
these steps.
Calling up a stored parking position set-
ting
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 123).
X
Select the exterior mirror on the front-
passenger side by pressing button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
if you press button : for the exterior mirror
on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
Memory function
103
Seats, steering wheel and mirrors
Z
To Next Page
Loading...
Need help?
General
