#
Fold the wiper arms back onto the wind‐
screen.
#
Switch on the ignition.
#
Press the î button on the combination
switch (/ page 130).
The wiper arms will return to the original
position.
#
Switch the ignition off.
Maintenance display
#
Remove protective film 1 from the mainte‐
nance display on the tip of the newly fitted
wiper blades.
When the colour of the maintenance display
changes from black to yellow, the wiper blades
should be replaced.
%
The duration until the colour changes varies
depending on the usage conditions.
Mirrors
Operates the outside mirrors
&
WARNING Risk of accident due to
adjusting vehicle settings while the vehi‐
cle is in motion
You could lose control of the vehicle in the
following situations in particular:
R
If you adjust the driver's seat, the head
restraints, the steering wheel or the mir‐
ror while the vehicle is in motion.
R
If you fasten your seat belt while the vehi‐
cle is in motion.
#
Before starting the engine: adjust the
driver's seat, the head restraints, the
steering wheel and the mirror and fas‐
ten your seat belt.
132
Light and sight
To Next Page
Loading...
Need help?
General
