Display messages
Introduction
â–ŒInformation about display messages
Display messages appear on the instrument dis-
play.
Display messages with graphic symbols are sim-
plied in the Operator's Manual and may dier
from the symbols on the instrument display. The
instrument display shows high-priority display
messages in red. Certain display messages are
accompanied by a warning tone.
Please act in accordance with the display mes-
sages and follow the additional notes in the Oper-
ator's Manual.
For some display messages, symbols will also be
shown:
R
Õ Further information
R
¨ Hide display message
With the le-hand Touch Control, you can select
the respective symbol by swiping to the le or
right. Pressing Õ displays further information on
the media display. Press the ¨ symbol to hide
the display message.
Display messages to be acknowledged can be hid-
den by pressing the back button P or with the
le-hand Touch Control. The display messages will
then be stored in the message memory.
Rectify the cause of a display message as quickly
as possible.
High-priority display messages cannot be hidden.
The instrument display will show these display
messages permanently until the cause of the dis-
play message has been rectied.
â–ŒCalling up saved display messages
On-board computer:
4
Service
5
1 Message
If there are no display messages, No Messages
will appear on the instrument display.
#
Scroll through the display messages by swip-
ing upwards or downwards on the le-hand
Touch Control.
#
To exit the message memory: press the back
button P.
362
Display messages and warning/indicator lamps
To Next Page
Loading...
Need help?
General
