Tail lamps
:
Turn signal lamp: PY 21 W
;
Reversing lamp: W 16 W
Replacing front bulbs (vehicles with
halogen headlamps)
Fitting/removing the cover on the front
wheel arch
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
X
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : 180° outwards until it
stops using a suitable object.
Cover ; is released.
X
Fold cover ; upwards.
X
To fit: insert cover ; into the left, right and
two lower catches.
X
Turn rotary knob : 180° inwards until it
stops using a suitable object.
Cover ; is locked.
Dipped-beam headlamps
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover : anti-clockwise and
remove it.
X
Push bulb holder ; upwards and pull out.
X
Pull the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the groove with
the lug at the top.
X
Push bulb holder ; down until it engages
audibly.
X
Press on housing cover : and turn it to the
right.
Main-beam headlamps
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover : anti-clockwise and
remove it.
X
Push bulb holder ; upwards and pull out.
X
Pull the bulb out of bulb holder ;.
Replacing bulbs
147
Lights and windscreen wipers
Z
To Next Page
Loading...
Need help?
General
