#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1 to 5 with a
maximum of 80 Nm.
#
Then tighten the wheel bolts evenly in a diago-
nal pattern in the order indicated 1 to 5 to
the specied tightening torque of 150 Nm.
&
WARNING Risk of accident due to incor-
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed torque.
#
Ensure that the wheel bolts or wheel
nuts are tightened to the prescribed
tightening torque.
#
If you are not sure, do not move the vehi-
cle. Contact a qualied specialist work-
shop and have the tightening torque
checked immediately.
#
Check the tyre pressure of the newly mounted
wheel and adjust accordingly.
%
The following does not apply if the new wheel
is an emergency spare wheel.
#
Vehicles with a tyre pressure monitoring sys-
tem: restart the tyre pressure monitoring sys-
tem (/ page 660).
Emergency spare wheel
Notes on the emergency spare wheel
&
WARNING Risk of accident caused by
incorrect wheel and tyre dimensions
The wheel or tyre size and the tyre type of the
emergency spare wheel or spare wheel and
the wheel to be replaced may dier. The emer-
gency spare wheel or spare wheel can signi-
cantly impair driving characteristics of the
vehicle.
To prevent hazardous situations:
#
Drive carefully.
#
Never t more than one emergency
spare wheel or spare wheel that diers
in size.
#
Only use an emergency spare wheel or
spare wheel briey.
#
Do not deactivate ESP
®
.
#
Have the emergency spare wheel or
spare wheel of a dierent size replaced
at the nearest qualied specialist work-
670
Wheels and tyres
F167 0009 02
To Next Page
Loading...
Need help?
General
