Overview of climate control systems
Notes on climate control
An interior air lter in combination with the prel-
ter in the engine compartment must always be
used so that the air conditioning system, pollution
level monitoring and the air ltration work cor-
rectly. Use lters recommended and approved by
Mercedes-Benz. Always have maintenance work
carried out at a qualied specialist workshop.
Overview of the air conditioning control panel
The indicator lamps on the buttons indicate that
the corresponding function is activated.
Control panel for dual-zone automatic climate con-
trol with stationary heater (example)
1
w Sets the temperature on the driver's
side
2
A Calls up/exits the air conditioning menu
Pressing and holding (approx. four seconds):
resets climate control to the basic settings
3
H Sets the airow or switches o climate
control
4
à Sets climate control to automatic mode
(/ page 145)
5
¬ Defrosts the windshield
6
¤ Switches the rear window heater on/o
7
g Switches air-recirculation mode on/o
(/ page 146)
8
Á Switches the A/C function on/o
(/ page 144)
Switches residual heat on/o (/ page 146)
9
Control panel for vehicles with dual-zone or 3-
zone automatic climate control without sta-
tionary heater: 0 switches synchroniza-
tion on/o (/ page 146)
Vehicles with control panel for dual-zone or 3-
zone automatic climate control with station-
ary heater: & switches stationary heater
on/o
A
w Sets the temperature on the front
passenger side
Climate control
143
To Next Page
Loading...
Need help?
General
