Mercedes-Benz MB-NTG4.5 User Manual

LVDS ANTHDMI-IN CAN/POWER
DIP-SW
USB/VIDEO
Model No.: MB-NTG4.5/4.7
V1.0
Connect phone/USB stick
Rear camera in
Front camera in
Camera 12V out, supply power for front & rear
view camera
ACC 12V out, always supply power
for external A/V device
Reverse detect, connect to reversing light positive
if "camera 12V out" does not output 12V when shift
to R gear, and enable "Activate R-CAM through
Reversing Lights" in settings
GND
Provided LVDS Cable
OEM LVDS cable
Connect to OEM LVDS
cable from screen
DIP
Screen size 5 6
1
2
3
4
5
6
7
8
Add-on microphone
Set to OFF△
Set to OFF△
Selection for screen size
Set to ON▼
Set to OFF△
Set to ON▼
Original microphone
7 inch
5.8 inch (default)
5.8 inch (alternative)
DIP SWITCH SETTINGS
Connect to
head unit
Connect to
head unit
connect to an FM transmitter
(not included) for audio delivery
if the OEM radio AUX feature
has not activated.
OEM quadlock connector
OEM head unit
Connect to OEM
quadlock connector
NOTE! Please
DO NOT
stick on the
metal part
NOTE! Please try another car model DIP settings if your current car model DIP doesn't work. Disconnect and reconnect interface's
power for effective after changing any DIP setting.
OFFON
OFF
OFF
ON ON
ON
ON

Mercedes-Benz MB-NTG4.5 Specifications

General

Brand	Mercedes-Benz
Model	MB-NTG4.5
Category	Car Video System
Language	English

Summary

Connection Diagram Overview

OEM Quadlock Connector

Connects to the vehicle's OEM quadlock connector for integration.

OEM Head Unit Interface

Connects to the OEM head unit, including LVDS and other interfaces.

Camera and Power Inputs

Details camera 12V out, ACC 12V out, and reverse detection connections.

External Device Connections

Connects to the head unit and phone/USB stick.

DIP Switch Settings

DIP Switch Configuration

Settings for microphone selection and screen size options via DIP switches.

System Operation Modes

Switching Between UIs

Switch between OEM and Add-on User Interface using the 'BACK' button.

Audio and Restart Procedures

OEM Radio Audio Setup

Activate hidden AUX input for audio transmission via engineer menu or OBD.

Quick Restart Tip

Restart the integration by holding the 'BACK' button for 10 seconds.

Package Contents

Included Components List

Lists the main unit, power/CAN harness, USB/video cable, LVDS cable, and antenna.