44
.
Armrest with Integrated Storage
Compartment (Rear Bench Seat)
Pull down the armrest by its strap.
Before storing the armrest in the
backrest, close its storage
compartment lid.
For the removal of the Rear Seat
Cushion, see Index.
Head Restraints, Rear
(Vehicles without rear power seats)
Turn key in steering lock to
position 1 or 2.
Press symbol-side of rocker switch to
release the head restraints. The head
restraints will then fold backward for
increased visibility.
Placing head restraints upright:
Pull head restraint forward by its strap
until it locks in position.
Inclination of head restraints:
The head restraint inclination can be
adjusted manually.
Important!
For safety reasons, always drive with
the rear head restraints in the upright
position when the rear seats are
occupied.
Keep area around head restraints clear
of articles (e.g. clothing) to not
obstruct the folding operation of the
To Next Page
Loading...
Need help?
General
