function which has not been changed manually,
however, continues to be controlled automati-
cally. When the manually set function switches
back to automatic mode, the AUTO display
reappears in the rear-compartment display.
Adjusting the climate mode settings
In automatic mode you can select the following
airflow settings for the driver's and front-
passenger areas:
FOCUS high airflow, slightly cooler setting
MEDIUM medium airflow, standard setting
DIFFUSE low airflow, slightly warmer and draft-
free setting
X
To set: set the climate mode using the mul-
timedia system (
Y page 274).
Setting the temperature
General notes
You can set the temperature separately for the
following areas on vehicles without rear-com-
partment climate control:
R
front footwells, left and right
R
driver and front passenger area
You can set the temperature separately for the
following areas on vehicles with rear-compart-
ment climate control:
R
front footwells, left and right
R
driver and front passenger area
R
rear compartment, left and right
Setting the temperature in the front
compartment using the front control
panel
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 145).
X
To increase or reduce: press the w
rocker switch up or down.
X
Only change the temperature setting in small
increments. Start at 72 ‡ (22 †).
Setting the temperature in the rear
compartment using the rear control
panel
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 145).
X
To increase or reduce: press rocker switch
H or N up or down (
Y page 133).
Only change the temperature setting in small
increments. Start at 72 ‡ (22 †).
Setting the footwell temperature
The footwell temperature for the driver and front
passenger can be set separately using the mul-
timedia system (see the Digital Operator's Man-
ual).
Operating the climate control systems
137
Climate control
To Next Page
Loading...
Need help?
General
