%
Depending on the model, only preset posi‐
tion buttons 1 and 2 are available.
#
To call up: press and hold the relevant pre‐
set position button 1, 2 or 3 until the front
seat, the steering wheel, Head-up Display
and outside mirror are in the stored position.
%
Depending on the model, only preset posi‐
tion buttons 1 and 2 are available.
%
If you release the preset position button, the
seat, steering wheel and mirror setting func‐
tions stop immediately.
Vehicles with the Active Multicontour
Seat Package: Setting the active multicon‐
tour seat or the 4-way lumbar support is still
carried out.
Vehicles without the Active Multicontour
Seat Package: Adjustment of the 4-way
lumbar support is still carried out.
Memory function in the rear passenger
compartment
Operating rear seat via the memory function
in the rear passenger compartment
Storing
Rear seat settings for up to three people can be
stored and called up using the memory function
in the rear passenger compartment.
The following settings can be stored for the rear
seats:
R
Position of the seat, backrest and head
restraint
R
Active multicontour seats: the seat side bol‐
sters of the seat backrest as well as the con‐
tour of the seat backrest in the lumbar and
shoulder regions
R
Seat heating: distribution of the heated sec‐
tions of the seat cushion and seat backrest
#
Press button 1.
The rear seat is selected if the indicator lamp
in the button does not light up.
#
Adjust the rear seat using the buttons in the
door control panel (→ page 97).
Seats and stowing
117
To Next Page
Loading...
Need help?
General
