Need help?Do you have a question about the MERCER LEXINGTON and is the answer not in the manual?
Instructions on how to manually wind the watch, including winding turns and duration.
Steps to set the watch time by pulling out the crown to the appropriate position.
The Mercer Watch Co. Lexington is a hand-wound chronograph timepiece that draws inspiration from classic designs like the Omega Speedmaster and Heuer Carrera. It is designed for watch enthusiasts who value individuality and clean aesthetics.
The Lexington watch features a manual wind chronograph movement, which means it needs to be wound manually to operate. To start the watch from a stop, the crown, located in position "A," should be rotated clockwise. Winding the crown 20 to 30 times will initiate the movement of the second hand. Once fully wound, the watch will maintain power for approximately 38 to 40 hours.
The watch also allows for time adjustment. To set the time, the crown needs to be pulled out to position "B." Once in this position, the time can be adjusted as needed.
The chronograph function, typical of such timepieces, allows for the measurement of elapsed time. While the manual does not detail the specific operation of the chronograph pushers, chronographs generally feature two pushers: one to start and stop the timing, and another to reset it. The watch face includes two sub-dials, which are characteristic of a "bi-compax" chronograph layout, indicating its ability to measure two distinct time intervals or display additional functions like running seconds and a minute counter for the chronograph. The outer ring of the dial also features a tachymeter scale, which can be used to calculate speed based on travel time over a fixed distance, or to measure production rates.
The Lexington is designed with a vintage aesthetic, available in two classic colorways. Its design incorporates a high-domed crystal, a feature commonly found in chronographs from the 1950s and 1960s, contributing to its retro appeal. This crystal is made from scratch-resistant K1 glass, offering enhanced durability compared to vintage counterparts.
The watch is fitted with a 20/16 mm perforated Italian calf leather strap, which not only complements its vintage look but also provides comfort and a stylish appearance. The strap's perforation is a design element often seen in racing-inspired watches.
The watch is rated for 5 ATM (atmospheres) of water resistance. This rating indicates that the watch is suitable for everyday use and can withstand splashes, rain, and brief immersion in water, such as washing hands. However, it is not designed for continuous use in water, meaning it should not be worn for swimming, showering, or diving.
To ensure the optimal performance and longevity of the Mercer Lexington watch, several maintenance tips are recommended.
For cleaning the watch case and crystal, it is advised to use soapy water and a small brush. This should be followed by wiping the watch with a microfiber cloth to remove any residue and polish the surfaces. This gentle cleaning routine helps maintain the watch's aesthetic appeal and prevents the buildup of dirt and grime.
Regarding water exposure, while the watch has a 50M water resistance rating, it is crucial to remember that this does not imply suitability for continuous water immersion. Therefore, activities like swimming or prolonged exposure to water should be avoided to prevent potential damage to the movement.
To protect the delicate internal movement, it is important to avoid heavy jolts or impacts to the watch. Strong impacts can disrupt the intricate mechanisms and affect the accuracy of the timepiece.
Magnetic fields can also negatively impact the watch's accuracy. Users should keep the watch away from strong magnetic sources, such as audio speakers, as these can magnetize components within the movement, leading to inaccurate timekeeping.
Finally, the leather strap requires specific care. To maintain its condition, the strap should be kept clean and away from solvents. Solvents can dry out, discolor, or damage the leather, reducing its lifespan and appearance. Regular cleaning and avoiding harsh chemicals will help preserve the quality of the Italian calf leather strap.
In summary, the Mercer Watch Co. Lexington is a meticulously designed hand-wound chronograph that blends vintage aesthetics with modern durability and functionality. Proper winding, time setting, and adherence to maintenance guidelines will ensure its reliable performance and lasting appeal.
General| Case Material | Stainless Steel |
|---|---|
| Case Diameter | 40 mm |
| Movement | Quartz |
| Band Material | Leather |
| Clasp Type | Buckle |
To Next Page