EasyManua.ls Logo

Merco TS2 Series - User Manual

Merco TS2 Series
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation and Operation Manual
Thermal Shelves
TS2 and TS2-B Series
I&W #07.05.238.00
Do not operate this equipment unless you have
read and understood the contents of this manual!
Failure to follow the instructions contained in this
manual may result in serious injury or death. This
manual contains important safety information
concerning the maintenance, use, and operation
of this product. If you’re unable to understand the
contents of this manual, please bring it to the
attention of your supervisor. Keep this manual in a
safe location for future reference.
No opere este equipo al menos que haya leído y
comprendido el contenido de este manual!
Cualquier falla en el seguimiento de las
instrucciones contenidas en este manual puede
resultar en un serio lesión o muerte. Este manual
contiene importante información sobre seguridad
concerniente al mantenimiento, uso y operación
de este producto. Si usted no puede entender el
contenido de este manual por favor pregunte a su
supervisor. Almacenar este manual en una
localización segura para la referencia futura.
© 2010 Merco, LLC

Table of Contents

Questions and Answers

  • M
    Mitchell SchmidtAug 11, 2025
    What to do if my Merco TS2 is not working at all?
    • E
      Elizabeth UnderwoodAug 12, 2025
      If your Merco Cooktop isn't working, first, ensure it is properly plugged into a power supply. Next, check that the Power On/Off switch is in the On position. If these steps don't solve the issue, it could be due to a malfunctioning Power On/Off switch, a burned-out heating element, or a defective thermostat control, in which case you should contact a Factory Authorized Service Agent or Merco for assistance.
  • C
    Christopher JensenAug 21, 2025
    Why is my Merco Cooktop unit too hot?
    • M
      Mark ThomasAug 21, 2025
      If your Merco Cooktop is getting too hot, the thermostat control might be set too high. Try adjusting it to a lower setting. It's also possible that the thermostat control is stuck in the “on” position or that the unit is plugged into an incorrect power supply, in which case you should contact a Factory Authorized Service Agent or Merco for assistance. Verify with qualified personnel that the power supply matches unit specification.
  • V
    vfosterSep 1, 2025
    How to fix a Merco Cooktop unit that is not hot enough?
    • T
      Timothy JonesSep 1, 2025
      If your Merco Cooktop is not hot enough, the thermostat control might be set too low; try adjusting it to a higher setting. Also, the location of the unit might be exposed to air currents, such as air conditioning ducts or exhaust fans. In this case, block the air currents or relocate the unit.

Merco TS2 Series Specifications

General IconGeneral
CategoryCooktop
BrandMerco
Number of Burners2
SeriesTS2
Gas TypeNatural Gas