Mercury 2002 Villager - Page 62

Turning the Rear A/C on
1. Set the main climate control rear fan control to Rear A/C; set the
mode selector to any position (other than OFF), and depress the A/C
control.
2. Set the fan speed on the Rear A/C fan control to a number between
1–4 to regulate the airflow to the rear seat section.
The Rear A/C fan speed may be adjusted by the front seat passengers.
For example, if the Rear A/C fan speed is set at 4, the Rear A/C control
on the main climate control system may be adjusted to a lower setting
and will override that of the rear seat setting.
Turning the Rear A/C off:
There are two ways to turn the rear air conditioning system off. The first
way is to set the Rear Fan Control on the main climate control system to
OFF.
OFF REAR A/C 1 2 3 4
1
MAX
A/C
OFF
2
3
4
A/C
1
0
2
3
4
REAR
A/C
OFF REAR A/C 1 2 3 4
A/C
Climate Controls
62