• Press OFF.
Pressing OFF will erase the
previously programmed set speed.
To return to a previously set speed
• Press RES/ACCEL. For
RES/ACCEL to operate, the
vehicle speed must be faster than
48 km/h (30 mph).
Indicator light
• Standard analog instrument
cluster
The “CRUISE” light comes on when
the ON control is pressed.
The “SET” light comes on when either the COAST/SET or RES/ACCEL
controls are pressed. The “SET” light turns off when the cruise CANCEL
control is pressed or the brake is applied. Both the “CRUISE” and “SET”
lights turn off when the OFF control is pressed or the ignition is turned
to the OFF position.
• Optional electronic instrument
cluster
This light comes on when either the
COAST/SET or RES/ACCEL controls are pressed. It turns off when the
cruise CANCEL control is pressed, the brake is applied or the ignition is
turned to the OFF position.
CANCEL
ON
OFF
RES
ACCEL
COAST
SET
CANCEL
ON
OFF
RES
ACCEL
COAST
SET
CRUISE SET
CRUISE
Driver Controls
93
To Next Page
Loading...
Need help?
General
