EasyManuals Logo

Mercury 2009 Mariner User Manual

Mercury 2009 Mariner
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
1. Turn the ignition switch to the on position. DO NOT START THE
ENGINE.
2. Wait until the safety belt warning light turns off (Approximately
1 minute).
Step 3 must be completed within 30 seconds after the safety belt
warning light turns off.
3. For the seating position being disabled, at a moderate speed, buckle
then unbuckle the safety belt three times, ending in the unbuckled state.
After Step 3, the safety belt warning light will be turned on for three
seconds.
4. Within approximately seven seconds of the light turning off, buckle
then unbuckle the safety belt.
This will disable the Belt-Minder feature for that seating position if it
is currently enabled. As confirmation, the safety belt warning light will
flash four times per second for three seconds.
This will enable the Belt-Minder feature for that seating position if it
is currently disabled. As confirmation, the safety belt warning light will
flash four times per second for three seconds, followed by three
seconds with the light off, then followed by the safety belt warning
light flashing four times per second for three seconds again.
After receiving confirmation, the deactivation/activation procedure is
complete.
AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
4X4
2009 Mariner (mrn)
Owners Guide, 2nd Printing
USA (fus)
Seating and Safety Restraints
125

Table of Contents

Other manuals for Mercury 2009 Mariner

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 2009 Mariner and is the answer not in the manual?

Mercury 2009 Mariner Specifications

General IconGeneral
BrandMercury
Model2009 Mariner
CategoryAutomobile
LanguageEnglish

Related product manuals