OPERATION
65
3. Feed fuel to the carburetor by squeezing the primer valve until
firm.
a - To fuel tank
b - To outboard
c - Fuel flow direction
NOTICE
Without sufficient cooling water, the engine, the water pump,
and other components will overheat and suffer damage.
Provide a sufficient supply of water to the water inlets during
operation.
NOTE: Be sure that the shift is at Neutral (N) when starting the
engine. This model is provided with start in gear protection.
4. Tiller Handle Models: Set the shift lever to neutral position.
NOTE: Be sure that the shift is at neutral when starting the engine.
This model is provided with start in‑gear protection.
5. Turn the throttle grip until the bar mark on the grip faces the
triangle mark on the steering handle.
To Next Page
Loading...
