Mercury 25M

OPERATION
72
Remote control models: Move the throttle‑only lever to the lower
position, then shift the control lever to Forward (F) position.
NOTE: CONFIRM reverse lock lever is in Release (R) position.
NOTE: Forward running is not possible unless the throttle‑only
lever is at the lower position.
37531
a
b
c
d
e
g
b
a
f
d
c
h
a - Fully opened position
b - Fully closed position
c - Throttle
d - Shift
e - Neutral (N)
f - Forward (F)
g - Reverse (R)
h - Throttle only lever
REVERSE
Tiller handle models: Move the shift lever to the Reverse (R)
position swiftly when the engine speed drops to its lowest level.