To Next PageTo Next Page
Need help?Do you have a question about the Mercury 3.0 Liter and is the answer not in the manual?
General| Fuel Type | Gasoline |
|---|---|
| Fuel System | Electronic Fuel Injection (EFI) |
| Full Throttle RPM Range | 5000-6000 RPM |
| Steering | Remote |
| Displacement | 3.0L |
| Cooling System | Water-cooled |
| Starting | Electric |
| Alternator Output | 60 amps |
| Shaft Length | 20 in, 25 in |
| Exhaust | Through Prop |
| Recommended Fuel | 87 octane |
Specifies compliance requirements for recreational craft, including standards like ISO 10240.
Outlines requirements for safety in machinery, referencing standards for safety integration and noise.
Details the process and conditions for transferring the limited warranty to a subsequent purchaser.
Explains the procedure for registering the product for warranty coverage in the US and Canada.
Defines the operator's duties for safe operation and understanding the manual.
Provides essential safety and operating guidance before using the outboard.
Specifies acceptable gasoline types, octane ratings, and precautions for use.
Recommends specific TC-W3 certified 2-Cycle oils for engine lubrication.
Describes the components and functions of the remote control system.
Explains the outboard's warning horn signals for various functions and potential problems.
Details the operation and adjustment of the power trim and tilt system.
Lists critical checks to perform before starting the engine for safe operation.
Provides instructions for properly breaking in the engine to ensure longevity.
Outlines routine checks and services based on usage intervals.
Guidance on how to inspect and replace blown fuses for electrical circuit protection.
Step-by-step instructions for safely removing and installing the outboard propeller.
Procedures for preparing the outboard for seasonal or prolonged storage.
Instructions for safely storing and maintaining the boat battery.
Lists common causes and solutions when the engine fails to start.
Identifies potential reasons for reduced engine or boat performance.
Advice on seeking service from authorized dealers for expertise and genuine parts.
Contact information for Mercury Marine service offices worldwide.
Key considerations and notices before starting the engine installation process.
Guidance on selecting an outboard that matches the boat's maximum horsepower rating.
Details on using specific fasteners to ensure secure steering link rod connections.
Instructions for properly trailering a boat with an outboard motor.
