EasyManuals Logo

Mercury 350 MAG MPI User Manual

Mercury 350 MAG MPI
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
40
Gas Inboard(Continued)
Scheduled Maintenance *
Annu-
ally
Every
100
hours or
Annually
Every
200
hours
or 3
years
Every
300
hours
or 3
years
Every
2
years
Every
5
years
Every
500
hours
or 5
years
Every
1000
hours
or 5
years
Per
OEM
Touch-up paint power package
and spray with corrosion guard.
Change crankcase oil and filter.
Change transmission fluid.
Replace fuel filter(s).
Check steering system and remote
control for loose, missing or
damaged parts. Lubricate cables
and linkages.
Retorque engine mounts.
Check spark plugs, wires, distribu-
tor cap and ignition timing. Check
and adjust idle speed.
Clean flame arrestor and crank-
case ventilation hoses. Replace
PCV valve.
Check electrical system for loose,
damaged or corroded fasteners.
Inspect condition and tension of
belts.
Check cooling system and exhaust
system hose clamps for tightness.
Inspect both systems for damage
or leaks.
Disassemble and inspect seawater
pump and replace worn
components.
Clean seawater section of closed
cooling system. Clean, inspect and
test pressure cap.
Replace coolant.
Check engine-to-propeller shaft
alignment.
* Only perform maintenance which applies to your particular power package
Whichever Occurs First
Interval Can Be Used On Any Model By Using Extended Life Coolant

Table of Contents

Other manuals for Mercury 350 MAG MPI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 350 MAG MPI and is the answer not in the manual?

Mercury 350 MAG MPI Specifications

General IconGeneral
Engine TypeV8
Horsepower300 HP
IgnitionElectronic
Alternator65 amp
Cylinders8
Displacement5.7 L
Fuel SystemMulti-Port Fuel Injection (MPI)
EmissionsEPA Certified

Related product manuals