MAINTENANCE
119
INSTALLING PROPELLER
1. Install the propeller thrust holder, propeller, washer, nut,
stopper, and cotter pin onto the propeller shaft.
a - Cotter pin
b - Nut
c - Washer
d - Stopper
e - Propeller
f - Propeller thrust holder
2. Place the propeller nut retainer over the pins. Place a block of
wood between the gearcase and propeller. Tighten the
propeller nut to the specified torque.
Description Nm lb‑in. lb‑ft
Propeller nut 75 55
3. Install the spark plug leads.
To Next Page
Loading...
