INSTALLATION
42
NOTE: Consult your authorized dealer to receive the proper
instructions or ask your dealer to mount the motor as necessary.
IMPORTANT: Most boats are rated and certified in terms of their
maximum horsepower limit, and this is shown on the boat's
certification plate. Do not equip your boat with an outboard that
exceeds this limit. If in doubt, contact your dealer. Do not operate
the engine until it has been securely mounted on the boat in
accordance with the instructions below.
INSTALLATION
1. Single engine installation: Position the outboard motor at
the center of the transom. Mount it using a cushioning pad or
plate.
a - Outboard on the centerline of the
transom
2. Twin engine installation: Position the outboard engines
470–660 mm (18.5–26.0 in.) apart, measured from the
centerline of each engine, and equal distance (a) from the
center of the transom.
38302
470–660 mm
(18.5–26.0 in)
a
a
To Next Page
Loading...
