EasyManua.ls Logo

Mercury 5 TwoStroke

Mercury 5 TwoStroke
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation
Maintenance
and
Installation
Manual
© 2017 Mercury Marine
4, 4.9, 5 TwoStroke
8M0133462 617 eng
Question and Answer IconNeed help?

Do you have a question about the Mercury 5 TwoStroke and is the answer not in the manual?

Mercury 5 TwoStroke Specifications

General IconGeneral
Engine Type2-Stroke
Cylinders1
Fuel SystemCarburetor
Starting SystemManual
Full Throttle RPM Range4500-5500 RPM
Horsepower5 HP
Displacement102 cc
Shaft Length381 mm (15 in)
Gear ShiftForward-Neutral

Summary

Welcome and Manual Introduction

Read This Manual Thoroughly

Emphasizes the importance of reading the manual for proper use and safety.

Safety Information and Warranty

Safety Alerts

Defines safety alert symbols and their meanings to prevent hazards.

General Information Overview

Boat Horsepower Capacity

Warns against exceeding the boat's maximum horsepower rating for safety.

Lanyard Stop Switch

Lanyard Stop Switch Operation

Explains the function and proper use of the emergency engine shut-off lanyard.

Safety Precautions

Protecting People in the Water

Advises on precautions to prevent injury to swimmers and people in the water.

Installation

Installing Outboard on Transom

Provides instructions on securely mounting the outboard motor to the boat transom.

Fuel and Oil

Fuel Requirements

Specifies the correct type and octane rating of gasoline required for the engine.

Oil Recommendation

Recommends the specific type of 2-cycle oil for the outboard engine.

Mixing Fuel and Oil

Details the correct oil-to-gasoline ratios for break-in and normal operation.

Engine Break-In Procedure

Explains the critical steps for breaking in the engine to ensure longevity and performance.

Features and Controls

Operation

Prestarting Check List

Lists essential checks to perform before starting the outboard engine.

Starting the Engine

Provides a step-by-step guide on how to safely start the outboard engine.

Maintenance

Inspection and Maintenance Schedule

Outlines daily, after-use, and annual maintenance tasks for the outboard.

Propeller Replacement

Provides detailed instructions and safety warnings for replacing the propeller.

Gearcase Lubrication

Explains the procedure and importance of checking and changing gearcase lubricant.

Storage

Related product manuals