3. Insert and lock the fill adapter into the air pump hose.
a - Hose
b - Air gauge
c - Double‑action/single‑action valve
d - Inflate port
a - Air pump hose
b - Fill adapter
INFLATING THE BOAT
NOTE: Air pressure can be measured using the air gauge provided with the air
pump or using an accessory air pressure gauge.
1. Inflate the side air chambers first. Inflate the air chambers as follows:
NOTE: Install the removable seat before the boat is fully inflated. Hook the
flanges that are located on the bottom of the seat into the nylon straps on the
side air chambers.
a. Clear a flat surface that is clean and free of sharp objects.
b. Unfold the boat and spread it out flat.
To Next Page
Loading...
Need help?
General