Mercury HP 500 EFI Bravo XR/XZ/III - Checking Fluid Levels

79500 EFI Bravo
MAINTENANCE
Maintenance Charts (cont.)
SCHEDULED MAINTENANCE TO BE PERFORMED BY DEALER
(CONT.)
Task Interval
Ignition System - Clean and
inspect condition
Flame Arrestor and Crank-
case Ventilation Hose -
Clean and inspect
Engine Alignment - Check
Every 100 Hours of Operation or
Once Yearly, Whichever Occurs
First.
Serpentine Belt - Inspect
condition and check tension
Replace Positive Crank-
case Ventilation (PCV)
valve
Transom Gimbal Housing
Assembly Swivel Shaft and
Gimbal Bearing - Lubricate
Saltwater use: Every 50 Hours of
Engine Drive Shaft - Lubri-
cate (if so equipped)
S
a
lt
wa
t
er
use:
E
very
50 H
ours
o
f
Operation or 60 Days, Whichever
Occurs First
Cooling System Hoses and
Clamps - Inspect for dam-
age and deterioration.
Check clamps for tightness
Occurs First
Freshwater use: Every 100 Hours
of Operation or 120 Days, Which-
ever Occurs First.
Electrical System - Check
for loose or damaged wiring
Steering System - Lubricate
and inspect for loose, dam-
aged or missing parts
(continued on next page)