EasyManua.ls Logo

Mercury M48 GT - Storage; Moving about; Ride and Handling

Mercury M48 GT
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wheeltech M48 GT electric scooter Part Code: Z40962-00
Owner’s Handbook Page 18 of 18
F Attention
When conducting maintenance of your vehicle, turn the scooter off at the ignition and remove the
charger cords
& Suggestion
Use a damp cloth or a duster with a non-abrasive polish to clean the scooter. When cleaning the
scooter, do not splash water directly on it as this could lead to malfunction.
Do not use petrol, solvents or vaporizing solution as these may deform or damage the shrouds.
Do not use wax.
7.4 STORAGE
Ensure the vehicle is stored with the seat set in the forward position and the ignition is switched off.
& Suggestion
Store the scooter in a location where it is away from direct sunlight, rain or damp. When storing for a
long period of time, charge the battery fully and then disconnect the battery terminals. Contact your
dealer for more details.
7.5 MOVING ABOUT
Before moving, switch the scooter off at the ignition.
Lift the scooter by the chassis and not by the bumpers or the shroud, as this could cause damage or
injury.
You will need 2 or 3 people to lift or move the vehicle. It is recommended that you remove the
batteries before lifting the vehicle.
7.6 RIDE AND HANDLING
The M48 GT comes with all round adjustable suspension. The suspension can be adjusted for a firm
ride for better handling, or a soft ride for user comfort. For more information about adjusting this,
contact your dealer.

Related product manuals