Mercury mariner 2009 - To Remove the Cross-Bar Assembly from the Roof Rack Side Rails

To remove the cross-bar assembly (if equipped) from the roof rack
side rails:
1. Loosen the thumbwheel at both
ends of the cross-bar (both
cross-bars are adjustable).
2. Slide the cross-bar to the end of
the rail.
3. Use a long, flat object to depress
the tongue in the endcaps on both
sides of the cross-bar.
4. Slide the cross-bar assembly off
the end of the rail.
2009 Mariner (mrn)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
82