MAINTENANCE
36 eng
2. Push the valve stem in and deflate the front air chamber a
quarter of the way.
3. Push the valve stems in on the side air chambers and
release the air pressure a quarter of the way.
4. Repeat this procedure to evenly deflate all of the air
chambers.
5. Push in the valve stem and turn the stem a quarter turn
clockwise to lock the valve in the open position.
6. Use the hand pump in the deflate mode to remove the
remaining air.
a. Insert and lock the hose into the pump handle port
marked "DEFLATE."
a - Hose
b - Deflate port
b. Insert and lock the air pump fill adapter into the air
chamber valve.
To Next Page