Mercury Optimax Service Information

END CAP OPTIMAX AIR COMPRESSOR
99-6 JUNE 1999 Page 3 of 6
• Remove the 4 bolts that retain the end cap to the compressor body.
57809
a
a-End cap retaining bolts (4)
• While rotating the pulley flange alternately clockwise and counterclockwise about 1/8
to 1/4 turn, pull outward on the pulley flange. Continue rotating until the end cap assem-
bly has been removed from the compressor body.

Mercury Optimax Specifications

General

Starting	Electric
Engine Type	2-Stroke
Fuel System	Direct Fuel Injection (DFI)
Displacement	Varies by model (e.g., 1.5L, 1.7L, 2.5L, 3.0L)
Shaft Length	20", 25"
Fuel Tank Capacity	External
Cylinders	Varies by model (e.g., 3, 4, 6 cylinders)