END CAP OPTIMAX AIR COMPRESSOR
99-6 JUNE 1999 Page 5 of 6
Part required
Qty. one (1) End cap assembly P/N 1173-828131A5
Repair Identification
FACTORY REWORK IDENTIFICATION
Engines reworked at the factory have a GREEN dot on the engine carton, near the serial
number location, and a WHITE dot on the compressor near the bar code identification.
DEALER REWORK
After the end cap has been replaced, place a WHITE paint dot on the compressor body near
the bar code identification.
Warranty
The normal 2 year Optimax warranty applies. Complete warranty claim listing.
• Outboard serial number
• Qty. 1 End cap assembly P/N 1173-828131A5
• Eight tenths (0.8) hour labor
• Warranty Flat Rate Code: NJC
• Failure Code : 761-00
U.S. and Canada: Return end cap with completed warranty claim.
INTERNATIONAL: Follow instructions issued by Marine Power International office or by
your distributor.
To Next Page
Loading...
Need help?
General
