SMARTCRAFT CONNECT GATEWAY INSTALLATION MANUAL
90-8M0184941 eng JUNE 2021 © 2021 Mercury Marine Page 5 / 10
7. Check that the SmartCraft CONNECT module and all other items on the boat are powered up. When these conditions
are met, select Find My Device.
8. The CONNECT module will appear on‑screen along with a list of available Wi‑Fi networks. Select a trusted network and
connect.
NOTE: Networks that do not require a password are acceptable to use. Captive portal Wi‑Fi networks cannot be used to
configure this module.
NOTE: The device name uses the last 3 digits of the module serial number for identification.
To Next Page
Loading...
