3
PRGM & ENTER ► KEY
Puts the manometer into the Program Mode from the Measure Mode.
When in
the Program Mode, pressing this key selects the programmable register
to be edited (with prompt for password if
Lockout is set). After the register
has been edited, pressing the PRGM key enters the new setting into the
manometer’s non-volatile
memory. This key also acts as a forward space ► key
when editing
user inputs such as the header name.
BACKLIGHT KEY
The BA
CKLIGHT key, represented by the standard light bulb symbol,
toggles
the display backlight between on and off.
The backlight c
onsumes additional battery energy. Turn the backlight
off, when
it is not needed, to optimize battery life.
1.888.475.5235info@Meriam-Direct.com
To Next Page