To Next PageTo Next Page
Need help?Do you have a question about the Meridian 5.24 and is the answer not in the manual?
General| CH output | 24kW |
|---|---|
| DHW output | 24kW |
| Heating Capacity | 24 kW |
| Mounting | Wall |
| Fuel Type | Natural Gas |
Essential advice and warnings for safe and proper boiler operation.
Step-by-step guide for initial boiler activation and system checks.
Understanding boiler display information, fault codes, and error signals.
Procedures for safely turning off the boiler for short or long periods.
Instructions for integrating and operating the optional solar system.
Maintaining correct heating system pressure and safety valve operation.
Recommended inspection schedule for boiler components by authorized personnel.
How the boiler's built-in antifreeze function protects against freezing.
Procedures for safely and completely removing the boiler.
Troubleshooting guide for common boiler issues and their resolutions.
Guidelines for professional installation, including general rules and room requirements.
Proper procedures for connecting water circuits in heating and DHW modes.
Installation requirements for the condensate trap and drainage system.
Safety regulations and procedures for connecting the gas supply.
Ensuring electrical safety through proper grounding and wiring connections.
Connecting and configuring thermostats, external sensors, and remote controls.
Optimizing performance for systems with different temperature zones.
Procedure for filling the heating circuit with water and venting air.
Checks and procedures required before initial boiler operation.
Regulations for installing flue outlets and terminals according to safety codes.
Installation guidelines for open chamber and forced draft configurations.
Installation of Type C13 coaxial air/flue ducts.
Installation instructions for vertical roof outlet air/flue duct systems.
Installation of Type C43 separate air and flue outlet systems.
Guidelines for installing C53-C83 type chimney flue outlet systems.
Activation and configuration of the solar integration system.
Checks to perform before the initial boiler start-up.
Configuring boiler parameters and setpoints for standalone operation.
Checking and adjusting the fan speed for optimal performance.
Navigating the boiler display to view parameters like temperature and fan RPM.
Procedures for checking and adjusting gas pressure and CO2 levels.
Step-by-step guide for setting CO2 levels for MERIDIAN 5.24/5.32.
Step-by-step guide for setting CO2 levels for MERIDIAN 3.15.
Interpreting display information for malfunctions and lockouts.
Activating a function to check combustion parameters.
Modifying the boiler's heating output percentage.
Choosing the flow temperature range for the heating phase.
How the pump anti-seize feature prevents circulator blockage.
How the boiler's antifreeze function operates during heating mode.
Annual checks and tests for boiler upkeep.
Annual cleaning procedures for the burner and heat exchanger.
Comprehensive troubleshooting table for boiler issues and their remedies.
Terms and conditions of the product warranty.
