Merit 710E - Page 12

BEFORE
YOU BEGIN
12
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 6
LOWER LINK
ARM
PEDAL ARM
BRACKET
PEDAL ARM BRACKET
PRE-ATTACHED WASHER
PRE-ATTACHED BOLTS
LOWER LINK ARM
FOOTPAD
SCREWS (A)
FOR MODEL 720E ONLY
SCREW (A)
8 mm
Qty: 6
A) Open HARDWARE BAG FOR STEP 6.
B) Attach FOOTPAD to LOWER LINK ARM PLATE using 3 SCREWS (A).
C) Repeat on other side.
A) Insert LOWER LINK ARM into PEDAL ARM BRACKET.
B) Insert PRE-ATTACHED BOLTS into BRACKET to attach PEDAL ARM and PRE-ATTACHED WASHER
to LOWER LINK ARM.
C) Repeat on other side.
HARDWARE BAG FOR STEP 6 CONTENTS (720E ONLY):