DISPENSING:
1. Close the clutch lever to engage clutch.
2. Slide battery onto the handle of the tool fully.
3. Adjust Speed Control Knob and/or Dosing Control Knob to your need.
+
SPEED
-
+
DOSE
-
4. Hold trigger to begin dispensing adhesive.
WHEN FINISHED DISPENSING OR WHEN END OF CARTRIDGE IS REACHED:
1. Release trigger.
2. Open clutch.
3. Retract rack.
4. Remove cartridge.
5. Store or dispose of used cartridge in accordance with manufacturer’s instructions and any applicable laws or
regulations.
6. To prolong battery life and prevent accidental starting, remove battery pack by simultaneously squeezing both release
buttons and sliding the battery pack forward.
&
© 2005 Meritool, LLC
8
To Next Page
Loading...