Merlin LCD Pocket Projector

To Next Page

Instructions

1) Slide the Power Selector button to the right to use the

projector’s built-in battery or to the left to power the projector

using DC adapter.

2) Press the Power button on the remote control or on the

projector to turn the projector on.

3) Press the Input Source button on the remote or on the projector

to switch between different input sources: PC-RGB, HDMI, AV,

USB, and SD CARD.

4) To connect your video source via HDMI, use an HDMI cable to

connect it to the HDMI port on the side of the projector and

select HDMI as the input source. (Supported formats: 576p,

480p, 720p, 1080p, 640x480, 800x600, 1024x768,

1280x1024, 1280x720, 1440x900, 1920x1080, 1366x768,

1280x800, 1440x960, 1600x1200, and 1680x1050)

5) To view media stored on your flash drives, insert flash drive in

the USB port or microSD card in the SD card slot on the side of

the projector and select USB or SD CARD as input source.

6) Connect your video source using an AV cable at the back of the

projector and select AV as the input source. (Supported AV

formats: NTSC and PAL)

7) Adjust focus using the “Focus Wheel” located on the left side

of the projector.

8) Press the Menu button on remote control to change the

projector’s settings.

9) Use the audio output port to connect the projector to an

external audio system or headset.

10) To charge the projector, connect the included adapter to the

charging port at the back of the projector.

11) The projector can display media just about anywhere. However,

for best results, we suggest you find a light-colored wall

(preferably smooth and white).

Maintenance

1) Fully charge the device’s battery before first use.

2) Do not apply excessive force on the Focus Wheel or when

inserting cables.

3) Connect cables in the right direction.

4) Do not block the vents located on the sides of the projector to

avoid overheating the unit.

5) Do not pour water or other liquids on the device.

6) Use only specified chargers that meet the device's voltage

rating (12V/2A).

Power Selector

LCD Pocket Projector

Project from the Palm of Your Hand

Thank you for purchasing this Merlin Product. Please read the instruction

manual carefully before using the product.

The documentation provided will allow you to fully enjoy all the features

this unit has to offer.

Please save this manual for future reference.

Product Interface

Need help?

Do you have a question about the Merlin LCD Pocket Projector and is the answer not in the manual?

Summary

Operating the Projector

Power and Input Control

Controls for powering the projector on/off and selecting the input source.

Connecting Video and Media Sources

Instructions for connecting HDMI, AV cables, and USB/SD cards for media playback.

Adjusting Settings and Output

Guidance on adjusting focus, projector settings, audio output, and charging.

Optimal Projection Environment

Recommendations for achieving the best projection results.

Maintenance and Care

General Care and Safety Guidelines

Essential maintenance steps including charging, handling, and avoiding damage.

Frequently Asked Questions (FAQ)

Power and Signal Troubleshooting

Solutions for common issues like the projector not powering up or showing 'No Signal'.

Picture and Sound Troubleshooting

Guidance on resolving blurry video or no sound issues.

Limited Warranty Information

Warranty Coverage and Exclusions

Details on the one-year warranty, repair process, and what is not covered.

Product Registration and Support

Registration Benefits and Contact Information

Information on registering the product and accessing support channels.