To Next PageTo Next Page
Need help?Do you have a question about the Merlin Swing L300 and is the answer not in the manual?
General| Max Gate Weight | 300 kg |
|---|---|
| Motor Voltage | 24V DC |
| Operating Temperature | -20°C to +55°C |
| Gate Weight Capacity | 300 kg |
| Power Supply | 230V AC |
| Motor Type | DC |
| Safety Features | Obstacle detection |
| Control Options | Remote control |
| Battery Backup | Optional |
Technical details of the gate opener models, including voltage, power, dimensions, and environmental ratings.
Lists all components and accessories included in the gate opener package for single and dual kits.
Essential tools required for the installation and setup of the gate opener system.
Visual and functional introduction to the gate opener system, showing single and dual gate configurations.
Guidance on correctly placing safety warning labels on the gate opener installation.
Recommendations and key considerations for planning the gate opener installation, including power and wiring.
Instructions for precise post bracket mounting based on gate dimensions and opening angle.
Procedure for securely mounting the fixed and live post brackets to the gate post.
Steps for attaching the gate mounting bracket to the gate leaf for opener connection.
How to install internal or external stops to define gate travel limits for safe operation.
Method for manually operating the gate opener in case of power failure or maintenance.
Guidelines for safely locating and mounting the control box for accessible programming and wiring.
Crucial safety precautions and warnings for all electrical connections and wiring.
Details on connecting motor cables to the control board terminals for motor 1 and motor 2.
Instructions for connecting the main AC power supply to the control box and PCB.
Schematic illustrating all electrical connections for the gate opener system and accessories.
Steps for connecting safety sensors such as IR beams to prevent entrapment.
Guide for installing an optional battery backup system for continuous operation.
Explanation of the control panel display and the function of each programming button.
Mandatory first-time configuration process including motor application, direction, and limit learning.
Procedure to set the gate's opening and closing limits and adjust motor force.
Configuring how remote controls operate the gate, e.g., open-close, stop-open.
Setting the function for various input commands like open-close, pedestrian mode, or stop.
Configuring the automatic closing timer feature for the gate opener.
Setting up electronic lock (E-Lock) or Mag-Lock functionality for enhanced security.
Configuring the operation of a connected flashing light accessory for gate movement indication.
Procedures for setting, entering, and changing access passwords for advanced configurations.
Adjusting motor force parameters for opening and closing directions after password entry.
Configuring motor speed for opening and closing operations, adjustable via password.
Adjusting the gate's speed during the final stage of travel for a smoother stop.
Restoring the gate opener to its default factory settings, including passwords and configurations.
Instructions for programming new remote transmitters or erasing existing codes.
Steps for connecting the gate opener to the myQ smart home system via a gateway.
A guide to common error codes, their problems, and actions required to clear them.
Information and images of compatible optional accessories for the gate opener system.
Visual representation of the steps and options for configuring basic gate opener settings.
Visual guide to the steps and options for configuring advanced gate opener parameters.
Instructions on how to register the product online to validate warranty coverage.
Details of the manufacturer's warranty coverage, terms, conditions, and exclusions.
