EasyManua.ls Logo

MERMADE DOUBLE WAVER - Maintenance

MERMADE DOUBLE WAVER
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THIS MANUAL PROVIDES SAFETY INSTRUCTIONS, DIRECTIONS AND
CARE INSTRUCTIONS. PLEASE STORE SAFELY.
PRODUCT: Double Waver / Double Waver Max
MODEL NUMBER/S: MH4100 MH4104 MH4108 MH4101 MH4105 MH4109
MH4102 MH4106 MH4110 MH4103 MH4107 MH4127 MH4136 MH4137 MH4138
MH4128 MH4130 MH4132 MH4134 MH4129 MH4131 MH4133 MH4135
TEMPERATURE: 140°C-220°C / 280°F-430°F
WATTAGE/VOLTAGE: Worldwide Voltage, 100-240V, 50-60Hz, 80W, 100-
240V, 50-60HZ, 95W
OPERATING INSTRUCTIONS
Plug the waver into the socket1.
Press down the power button to turn ON. Press the power button to
increase or decrease the temperature. The light will flash until desired
temperature is reached.
2.
Start by dividing hair into sections. Smaller sections will create more
defined waves. Spray each section liberally with a heat/thermal protectant.
Taking one section at a time, start at the top close to the roots and clamp
the hair, making sure that the hair is evenly placed inside the barrels. Be
careful not to touch the scalp with the tool. Hold for 2-3 seconds. Hold for
less time if hair is easy to curl, or if you want less defined waves.
3.
Once you have released your first clamp, re-clamp the top barrel of waver
on to the last wave bend. You want to overlap each wave with your waver
to create a seamless wave from roots to ends. Repeat this process through
to the ends over the whole head.
4.
Once you have finished waving, make sure the hair has completely cooled
down before touching to allow it time to set.
5.
Hold down the power button to turn off.6.
Once completely cool, store in a safe place.7.
WARNING: Always do a test 1cm section at the back of your hair to ensure the
proper setting for your hair type & to ensure the tool is working correctly & you
understand how it functions. Place on a thermal/heat resistant surface.
AS WITH MOST ELECTRICAL MACHINES, ELECTRICAL PARTS ARE
ELECTRICALLY LIVE EVEN WHEN THE SWITCH IS OFF. TO REDUCE THE RISK
OF BURNS, FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS:
1. Always unplug appliance immediately after using. An appliance should never
be left unattended when it is plugged in.
2. Do not use while bathing or sleeping.
3. Do not place or store the machine where it can fall or be pulled into a tub or
sink.
4. Do not place in or drop in water or any other liquid.
5. If the tool falls into water, unplug it immediately. Do not reach into the water.
6. Use this appliance only for its intended use as described in this manual. Do
not use attachments not recommended by manufacturer.
7. Always place the appliance on a heat-resistant, stable flat surface.
8. Never operate this appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or if it has been
dropped into water.
9. Keep cord away from the heated surfaces. Do not wrap the cord around the
appliance.
10. Do not use an extension cord.
11. This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
ATTENTION
1. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
2. WARNING: Do not use this appliance near bathtubs, showers, basins or other
vessels containing water.
3. Keep appliance out of reach from young children, particularly during use
and cool down.
4. Never leave appliance unattended when it is connected to a power supply.
Always place the appliance on a heat-resistant, stable flat surface.
5. Do not use on wet, damp or synthetic hair.
6. For additional protection, the installation of a residual current device (RCD)
having a rated residual operating current not exceeding 30mA is advisable in
the electrical circuit supplying the bathroom. Ask your installer for advice.
7. Always do a strand test before using on your hair as heat can affect some
hair colour, in particular on freshly coloured, grey or toned hair.
MAINTENANCE
1. To clean the unit, be sure the unit is cool and unplugged. Wipe the handle
and plates with a damp cloth. No other maintenance is necessary.
2. Do not attempt to repair the appliance yourself. This appliance has no user
serviceable parts.
3. Unplug the unit whenever itis not in use. Allow it to cool, then store it out of
reach of children in a safe, dry location.
4. Never wrap the cord aroundthe appliance, since this will cause the cord to
wear prematurely and break, thus voiding warranty. Handle the cord carefully
and avoid jerking, twisting, or straining it, especially at plug connections.
SAFETY & RECYCLING
1. Take extra care to ensure the hot plates do not contact skin or eyes.
2. Use a mirror when using the appliance to assist with safe usage.
3. Do not place tool on surfaces that are not heat resistant.
4. Polythene bags over the product and packaging may be dangerous. To
avoid danger of suffocation, keep away from babies and children. These bags
are not toys.
5. This appliance may not be treated as household waste. It should be handed
to an appropriate collection point for the recycling of Electrical and Electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about the recycling of this product,
please contact your local council office or your household waste disposal
service. For EU/UK disposal WEEE (Waste from Electrical and Electronic
Equipment) requires that used household appliances are not disposed of in
the normal municipal waste stream. Used appliances must be collected
separately in order to optimise the recovery and recycling of the materials from
which they are made and to reduce the impact on human health and the
environment.
LIMITED 2-YEAR GLOBAL WARRANTY
Mermade Hair warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, Mermade
Hair will replace item. Email hello@mermadehair.com for Warranty issues and
provide the batch code found on the power cord. This warranty does not cover
products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Wrapping cord around appliance causing premature wear & breakage
• Any other conditions beyond our control
MERMADE HAIR SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL
PURCHASE. KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES OR REGISTER YOUR WARRANTY ONLINE. This
warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not
allow that exclusion or limitation of incidental, special, or consequential
damages.
SAVE THESE INSTRUCTIONS