Merry Pet Room with A View User Manual

NOTE:
*Read all instructions before starting
*Do not completely tighten any bolts until the unit is fully
assembled and sitting on a level surface.
MADE IN CHINA
TOOL REQUIRED
Electrical Screwdriver
or
Phillip Screwdriver
H.
Bolt and nut (8 pcs)
I.
Long Screw (10 pcs)
J. Short
Screw (8 pcs)
A.
Front Panel
B.
Rear Panel
C.
Side Panels (2)
D. Floor Panel
E. Sun Deck Panel
G. Stair Case
F.
Deck Fence
Page 1 v.2
Please check contents before assembly.
Room with A View

Merry Pet Room with A View Specifications

General

Product Type	Pet House
Material	Wood
Suitable For	Cats and Small Dogs
Indoor/Outdoor	Indoor
Assembly Required	Yes
Color	Brown

Summary

Parts and Tools

Tool Required

Lists the necessary tools for assembly, including electrical or phillip screwdrivers.

Assembly Steps

Step 1: Install Front, Rear, and Side Panels

Assemble the main panels of the structure using bolts and nuts.

Step 2: Place Floor and Sun Deck Panels

Insert the floor panel and attach the sun deck panel to the house structure.

Step 3: Assemble Deck Fence

Construct the deck fence by assembling its parts with long screws.

Step 4: Attach Deck Fence to Sun Deck

Secure the assembled deck fence to the sun deck panel using short screws.

Step 5: Attach Staircase to Sun Deck

Connect the staircase to the sun deck panel with short screws.

Step 6: Attach Staircase to Side Panel

Fasten the staircase to the right side panel of the structure.