Merry Products MPG-TBS01-T

Need help?

Do you have a question about the Merry Products MPG-TBS01-T and is the answer not in the manual?

Summary

Assembly Steps

Step 1: Assemble Table Legs

Insert doweled ends of Table Leg Cross Beams (B) into Table Legs (A). Secure with Bolts (1) and Allen Key (6).

Step 2: Attach Cross Beams

Insert Center Cross Beam (C) and End Cross Beams (D) into Table Leg Cross Beams. Secure with Bolts (2) and Allen Key (6).

Step 3: Secure Table Top Panels

Lay table top panels upside down. Secure Sides (F) to Center (E) hinges using Screws (4) and Phillips screwdriver.

Step 4: Attach Base to Table Top

Flip base upside down, place table legs into position. Secure with Washers (5) and Bolts (3) using Allen Key.

Use Instructions

Folding Mechanism

Details on how to secure the table top sides into the upright position using support beams.

Unfolding Mechanism

Instructions for folding the table back down by pushing support beams and lowering side panels.

Care Instructions

General Care and Maintenance

Advice on indoor/outdoor use, oil-based stain treatment, and protection from harsh weather.

Cleaning and Handling

Instructions for cleaning panels with water and handling with care during assembly.

This document provides assembly instructions, usage instructions, and care instructions for the MERRY PRODUCTS™ Folding Round Dining Table Set, model number MPG-TBS01-T.

Function Description

The MERRY PRODUCTS™ Folding Round Dining Table Set is a versatile piece of furniture designed for both indoor and outdoor use. Its primary function is to serve as a dining table, with the added feature of being foldable for space-saving storage or transport. The table's design allows its side panels to be folded down, transforming it from a round dining table into a more compact form. When needed, the side panels can be lifted and secured with support beams to create a full round table surface.

Important Technical Specifications

The table set includes several components and hardware for assembly:

Components:

Table Legs (A): 4 pieces
Table Leg Cross Beams (B): 2 pieces
Center Cross Beam (C): 1 piece
End Cross Beams (D): 2 pieces
Center of Table Top (E): 1 piece
Side of Table Top (F): 2 pieces

Hardware:

(1) Bolts (M7 x 90 mm): 4 pieces (used in Step 1)
(2) Bolts (M7 x 60 mm): 6 pieces (used in Step 2)
(3) Bolts (M8 x 60 mm): 8 pieces (used in Step 4)
(4) Screws (M4 x 15 mm): 18 pieces (used in Step 3)
(5) Washers: 8 pieces (used in Step 4)
(6) Allen Key: 1 piece (used in Steps 1, 2, and 4)

Tools Required:

#2 Phillips Screwdriver
Allen Key (included)

Usage Features

The table offers flexible usage modes:

Assembly:

Step 1 (Base Assembly - Figure 1): Insert the doweled ends of the Table Leg Cross Beams (B) into the Table Legs (A). Secure these connections with Bolts (1) and tighten using the Allen Key (6). This forms the basic leg structure.
Step 2 (Base Assembly - Figure 2): Insert the doweled ends of the Center Cross Beam (C) and End Cross Beams (D) into the Table Leg Cross Beams (B). Secure these connections with Bolts (2) and tighten using the Allen Key (6). This completes the table's base frame.
Step 3 (Table Top Assembly - Figure 3): Lay the table top panels (E and F) gently upside down. Secure the Side of Table Top (F) panels to the hinges of the Center of Table Top (E) using 3 (4) Screws for each hinge. A Phillips screwdriver is required for this step.
Step 4 (Attaching Base to Top - Figure 4): Flip the assembled base of the table upside down. Place the ends of the Table Legs (A) into the designated places on the underside of the table top. Secure the base to the table top using washers (5) and Bolts (3), tightening with the Allen Key (6).

Folding and Unfolding (Use Instructions):

Folded Position (Figure 5): Once assembled, the sides of the table top (F) will hang down, representing the folded position.
Unfolding to Table Position (Figure 6 & 7): To secure the sides of the table top (F) into an open table position, lift one side at a time. Reach underneath to pull the support beam out from the center of the table top (E). Slide the support beam underneath the side of the table top until it stops, providing support. Repeat for the other side.
Folding Back Down: To fold the table back down, hold the side of the table top (F) and push the support beams back into the center of the table top (E). Gently lower the side panels into the folded position.

Maintenance Features

To ensure the longevity and appearance of the Folding Round Dining Table Set, the following care instructions are provided:

Durability: The product is designed for both indoor and outdoor use.
Weather Protection: The table set has been treated with an oil-based stain. For outdoor use, it is recommended to stain or repaint the table with an oil-based weatherproof coating of your choice before initial use and annually thereafter. This practice can significantly increase the life expectancy and maintain the aesthetic appeal of the furniture.
Storage: During harsh weather conditions, it is advisable to cover the table set to protect it from weathering.
Cleaning: Panels can be cleaned by rinsing them with water.
Assembly Handling: When assembling, handle all panels and hardware with care to prevent any potential damages or injuries.

The MERRY PRODUCTS™ Folding Round Dining Table Set is designed to provide comfort and enjoyment for many years with proper care and maintenance.