Need help?Do you have a question about the Mesa FLUX-FIVE and is the answer not in the manual?
Connects the device output to amplifier input using a shielded cable.
Connects guitar output to the device; activates circuit when cable inserted.
Master output level control to balance signal to the host amplifier.
Boosts HI Mode volume relative to LO Mode; a "boost only" feature.
Adjusts low frequencies, affecting the sound's tightness or fullness.
Adjusts high frequencies, affecting cut, bite, and brightness.
Determines the amount of gain (overdrive) in the signal path for both modes.
Graphic EQ section with toggles and sliders for +/- 12db boost/cut per band.
Toggles between HI and LO Gain Modes for different overdrive levels.
Hard bypasses the FLUX-FIVE, removing all circuitry from the signal path.
Accepts a standard 9-Volt DC power supply with specific polarity and size.
Unit operates on a 9-Volt battery, which is automatically disconnected when external power is used.
General| Brand | Mesa |
|---|---|
| Model | FLUX-FIVE |
| Category | Music Pedal |
| Language | English |
To Next Page