Mesa MALTA - User Manual

To Next Page

| Revisão

Código

Você vai precisar de/ You will need / Usted necesitará

Weight in Kg/ Peso en Kg

Dimensions in mm/ Dimensiones en mm

* PESO EM KG/

DIMENSÕES EM MM/

Hammer

Martillo

Martelo

1,5m

Ferramentas não inclusas

Tools not inclused / Herramientas no incluidas

Espaço recomendado para montagem

Chave Philips

Recommended space for assemble

Espacio recomendado para el armado

Screwdriver

Destornillador cruz

1 person

1 persona

1 Pessoa

instructions / Instrucciones deAssembly armado

MANUAL DE

MONTAGEM

PESO MÁXIMO SUPORTADO PELAS PEÇAS, SENDO ESTE DISTRIBUÍDO UNIFORMEMENTE.

Maximum weight supported by parts, being this evenly distributed.

Peso máximo soportado por las partes, siendo esta distribuido uniformemente.

NOTA:

NOTE:

NOTA:

Este produto pode ser montado com as gavetas para a sua direita ou esquerda.

This product can be assembled with drawers to right or left.

Este producto se puede armar con los cajones a la derecha o izquierda.

- 2 cajonesMaltaEscritorio

- 2 drawers

- 2 GAVETAS

MaltaOffice table

MALTAMESA

1171

Need help?

Do you have a question about the Mesa MALTA and is the answer not in the manual?

Summary

Malta Desk Assembly Manual

Required Tools and Materials

Lists necessary tools, materials, and personnel for desk assembly.

Accessory Identification

Main Parts Identification

Left Drawer Assembly: Pre-Assembly

Pre-Assembly: Drawer Components

Initial steps for assembling drawer parts and components for the left side.

Left Drawer Assembly: Main Frame

Attaching Slides to Side Panels

Installing drawer slides onto side panels 03 and 04 for the left configuration.

Left Drawer Assembly: Steps 1-4

Step 1: Connect Side Panel to Top;Bottom

Connecting side panel 04 to top base 05 and bottom base 02.

Step 2: Attach Back Panel

Attaching back panel 07 to the assembled structure.

Step 3: Attach Second Side Panel

Connecting side panel 03 to the structure.

Step 4: Secure with Screws

Securing the main frame using structural screws.

Left Drawer Assembly: Steps 5-8

Step 5: Attach Drawer Supports

Attaching drum locks and supports to the main structure.

Step 6: Install Drawer Slides

Installing drawer slides (K4) and connecting hardware.

Step 7: Attach Drawer Fronts

Attaching drawer front panels using specific hardware.

Step 8: Assemble Drawers

Assembling the drawer boxes with fronts, sides, and bottoms.

Right Drawer Assembly: Pre-Assembly

Pre-Assembly: Drawer Components

Initial steps for assembling drawer parts and components for the right side.

Right Drawer Assembly: Main Frame

Attaching Slides to Side Panels

Installing drawer slides onto side panels 03 and 01 for the right configuration.

Right Drawer Assembly: Steps 1-4

Step 1: Connect Side Panel to Top;Bottom

Connecting side panel 03 to top base 02 and bottom base 05.